All Collections
Installation & Setup
SmartShade
Configuring the Top and Bottom Shade Positions
Configuring the Top and Bottom Shade Positions
Manu Menon avatar
Written by Manu Menon
Updated over a week ago

Please ensure the SmartShade is properly mounted and attached to your window shade's beaded chain/cord loop.

  1. Press and hold the "SET" button on top of the SmartShade for at least 3 seconds. The top arrow on your SmartShade will blink continuously while the bottom arrow will stay solid blue.
    ​
    ​


    ​

  2. Press the top arrow to move your shade a little. If the shade is opening, then go to Step 3.
    ​
    If your window shade is closing, press and hold "PAIR" on top of the SmartShade for 3 seconds. This will reverse directions. Try pressing the top arrow again on the SmartShade and this time your window shade will open.
    ​
    ​


    ​

  3. Set Top Position: Press and hold the "Top Arrow" button until you reach your preferred top position and then press the "SET" button on top the SmartShade to save. The bottom arrow will blink continuously while the top arrow will now become a solid blue.
    ​
    ​


    ​

Set Bottom Position: Press and hold the "Bottom Arrow" button until you reach your preferred bottom position and then press the "SET" button on top of the SmartShade to save. Both the top and bottom arrows will now be a solid blue.
​
​

For video instructions, see below:

Did this answer your question?