Skip to main content
All CollectionsInstallation & SetupSmartButton
How to use the RYSE SmartButton
How to use the RYSE SmartButton

How to pair with the remote RYSE SmartButton, and send commands to your devices

Sappho Hansen Smythe avatar
Written by Sappho Hansen Smythe
Updated over a week ago

The RYSE Button is a simple remote control, enabling you to send commands to your SmartShade with a single push.

How to pair your RYSE button with the RYSE Smartshade

  1. Set your Smartshade's top and bottom positions using the RYSE app or using the on-device controls.

  2. Walk close to the Smartshade you would like to pair.

  3. Press and hold the RYSE button for 5 seconds or till you hear and beep and notice the light change to Blue.

  4. Now press the pair button once on the Smartshade and let go.

  5. You will hear a slightly longer beep, and the Blue pairing light will disappear.

  6. You have now paired your Smartshade to the RYSE Button!

How to use the RYSE button

  1. Press the RYSE button once to open the RYSE Smartshade.

  2. Press again to Stop.

  3. And a third time to close the RYSE Smartshade.

You may once have a maximum of 4 RYSE Smartshades paired with 1 RYSE button.

How to use the RYSE button with a group

  1. Press the RYSE button once to open all RYSE Smartshade.

  2. Press again to Stop all RYSE Smartshade.

  3. And a third time to close all the RYSE Smartshade.

Did this answer your question?